How To Paint A Skateboard With Acrylic

How to Paint a Skateboard Deck

Skateboard decks are indeed attractive with their many designs. Besides, some are colorful. You can buy them at skateboard stores and simply selection your preference.

Only, would yous like to customize the skateboard deck that can speak more of yourself? Why not try painting your deck? Here are some steps on how to paint a skateboard deck and make it more appealing to you.

What You Demand in Painting Your Deck

Customizing your deck by painting takes attempt and skill. Also, yous will be needing the post-obit materials:

Sandpaper
Aerosol primer or any primers
Stencil with the design you lot similar
Tape
Spray paints
Articulate coat

You may spend a little on these materials. Just, they are worth having a complete and customized deck for yourself.

Painting a Skateboard Deck in Easy Steps

Can-I-paint-my-skateboard-deck

You tin can customize a skateboard deck using spray paint. On the other hand, if you are expert at hand painting, yous may do information technology besides.

This will make your deck more unique and personalized. Meanwhile, here are the steps for painting a deck using spray paint with the design of your choice.

1. Remove the trucks of your board

Start, become your skateboard deck and remove the two trucks advisedly. Store them in a safe place. And exist sure that the components of trucks are complete when you reinstall them in your deck once yous have completed painting your board.

2. Sand the deck

Become a fine sandpaper or 400 or 320 sandpaper. Sand your deck in a circular motion. Smoothen it well. Then, get a sponge and soak it in warm soapy water. Rub the soap sponge on your deck. After washing your deck, let it dry for a few minutes. This will make your paint sticks to your deck well.

3. Get a record

Bind the tape on the topside screw holes and the sides of your deck carefully. If y'all are not able to tape them, there will be drips on the grip and sides of your deck.

iv. Apply an aerosol primer or manus primer on your deck

Coat your deck with a primer. You may use an aerosol primer or a hand primer. Spray the primer evenly to the deck. Practice not arrive sparse or thick but make certain that information technology covers your deck well.

Continue in mind that you lot have to dry completely each layer of the primer before y'all coat it with another layer. Yous may at least dry it for 30 minutes for each layer of a primer. Also, do not forget to wear protective eyewear or mask when spraying the primer.

5. Smooth the deck with a sandpaper

Once the primer is completely dry, y'all may re-sand the board with 150-grit sandpaper. Remove any blisters or bubbles using the sandpaper. Do this gently in back and along movements. Also, get rid of the primer sawdust once you lot are done sanding using a wet cloth and rag. Then, dry your deck.

half dozen. Prepare the pattern of your deck

Become a newspaper and sketch your blueprint for your board. The design will be your preference. Consider the proportionality of the drawings. Also, think about the colors you are going to employ. You may mask your blueprint on the board.

7. Fix the colors of your pattern

If yous are going to apply four colors for your blueprint, you must apply four layers of pigment. You may number the designs y'all created to know which 1 you are going to paint first.

8. Apply paint for your base of operations

The base color volition be the background of your stencil pattern. Information technology is advisable to use white or black to make other colors stand out in your design. Make sure to spray the base evenly with the color of your choice.

ix. Record your design on the deck

Using a stencil with your design, tape information technology to your deck. Exist careful in taping your stencil. Yous may use materials such as tough card stock, mylar, or cardboard.

10. Apply the layers of colors

The opening or the spaces in your stencil volition exist the color of the 2nd layer. Spray your choice of color on the board evenly. You may do the aforementioned on the next layer until it finishes your design. On the other paw, be sure that the layer of paint is completely dry before you spray pigment the next layer.

xi. Remove the record or stencils gently

Once the paints are dried, you may remove the tape or stencils gently. Simply, drag them slowly one past one. Once washed, you will see your consummate pattern.

12. Apply clear coat

Let the paint of your deck dry completely. Then, give information technology a clear glaze to make it shine. Also, it will protect your paint from the ultra-violet rays of the sun.

thirteen. Re-install the trucks

Finally, after the coat is dried, you may re-install the trucks. Yous now take your finished painted skateboard.

If you want to level upwardly the painting of your skateboard using hand painting and acrylic paints, you may watch the video beneath for instructions:

The Lesser Line

Painting your skateboard deck is fun and interesting to do. But, choose a pattern that you like.

Of course, yous take to exert effort for this and spend quite a fiddling on the materials. Only, no worries, the steps mentioned in this commodity will guide you lot on how to paint a skateboard deck.

If you have any suggestions almost how to customize the skateboard deck, you may note them in the comment box. Nosotros are thankful for these suggestions and appreciate them very much.